Sony STR-DN1080 Instrukcja Użytkownika Pobierz pdf (Strona 43)

Listening/Watching

When [Enhanced format] is selected, we

recommend you to use a Premium High Speed

HDMI Cable with Ethernet, which can support

bandwidth up to 18 Gbps.

Some devices (cable box or satellite box, Blu-ray

Disc player, and DVD player) does not work well

with [Enhanced format] setting. In this case, select

[Standard format].

If your TV have similar menu for high bandwidth

video format, check the setting on the TV menu

when you select [Enhanced format] on this

receiver. For details on the TV menu setting, refer

to the operating instructions of the TV.

Since the HDMI IN VIDEO 1 jack does not support

video formats such as 4K/60p 4:4:4, 4:2:2 and 4K/

60p 4:2:0 10 bit, you cannot set the HDMI signal

format.

1 Connect the speakers located

in Zone 2 (page 25).

2 Turn on the receiver.

3 For USA and Canadian models:

Set the priority for speaker

terminals.

Press HOME, then select [Setup] –

[Speaker Settings] – [SURROUND BACK/

ZONE2 Priority] – [ZONE2 Terminals].

For other models:

Select a speaker pattern, and

set the assignment for the

speaker terminals.

 Press HOME, then select [Setup] –

[Speaker Settings] – [Speaker

Pattern].

 Select a speaker pattern without

surround back speakers, and then

select [Save].

 Select [Surround Back Speaker

Assign] –[Zone2].

4 Press HOME, then select [Zone

Controls].

5 Set [Zone2] – [Zone2 Power] –

[On].

You can also press ZONE SELECT on the

receiver repeatedly to select

“ZONE2 ON ?”, then press ZONE POWER

on the receiver to set.

6 Select [Zone2 Input], then

select the source signals you

want to output.

You can also turn INPUT SELECTOR on the

receiver while “2. xxxx”* appears on the

display panel.

If you want to listen to the same sound as main

zone in Zone 2, select [SOURCE].

7 Start playback on the selected

input device.

8 Select [Zone2 Volume], then

adjust the volume.

You can also turn MASTER VOLUME on

the receiver while “2. xxxx”* appears on

the display panel.

* “xxxx” is the input name.

To exit zone operation

Set [Zone2 Power] to [Off] in step 5.

Only audio signals from [USB], [Bluetooth] (only

when [Bluetooth Mode] is set to [Receiver]), [Home

Network], [Music Service List], and [FM TUNER] and

audio signals input from AUDIO IN jacks located on

the rear panel of the receiver are output to the

Zone 2 speakers.

External digital input from OPTICAL IN, COAXIAL IN

and HDMI IN jacks cannot be output to Zone 2.

If you set [DSD Native] in [Audio Settings] to [On],

no audio signals for DSD content from [USB] or

[Home Network] are output to the Zone 2 speakers.

Enjoying sound from speakers

located in other rooms (Zone 2)

Tip

Note

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 71 72

Komentarze do niniejszej Instrukcji

Brak uwag

Sony STR-DN1080 Instrukcja Użytkownika Strona 43

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Odbiorniki AV Sony STR-DN1080