Sony PCV-R553DS Instrukcja Użytkownika Pobierz pdf (Strona 49)

Removing, Installing, and Replacing Components

Installing System Memory

If necessary, remove the memory module you wish to replace (see

“Removing a Memory Module” on page 38).

Remove the new memory module(s) from its anti-static package.

Hold the memory module only by its edges to prevent static-

electricity damage.

Choose the size of the memory module and configuration as shown

in the following table. Memory modules can vary in size and speed

between sockets. The minimum memory size is 8 MB; the maximum

memory size is 256 MB. The BIOS automatically detects the type, size

and speed of the memory modules.

Disconnect the power cord from the computer.

Remove the cover (see “Removing the Cover” on page 22).

If you cannot reach the memory modules, remove the power supply

(see “Removing the Power Supply” on page 46).

Before opening the system unit, save any open files, exit Windows, turn off

the power of the computer and all attached peripherals, and then unplug the

power cord.

Memory module configurations (MB)

* The PCV-R553DS ships with 128 MB. SDRAM is expandable to 256

MB.

DIMM1 DIMM2

0, 8, 16, 32, 64, 128 0, 8, 16, 32, 64, 128

Touch any exposed metal part of the chassis to discharge static electricity in

your body before handling a memory module.

✍

Use only 100 MHz FSB-supported memory. Do not mix 66 MHz memory with 100 MHz

memory. Supports SDRAM memory. Does not support EDO memory or buffered DIMM

memory.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 121 122

Brak uwag

Sony PCV-R553DS Instrukcja Użytkownika Strona 49