Sony KLV-26S400A Instrukcja Użytkownika Pobierz pdf (Strona 33)

Additional Information

KLV-40/37/32/26S400A

3-876-548-11(3)

Troubleshooting

If you find any problem while viewing your TV, you can either check the Troubleshooting guide below or

use the “Factory Settings” function (page 28). If the problem persists, contact your Sony dealer.

Check whether the 1 (standby) indicator is flashing in red.

When it is flashing

The self-diagnosis function is activated.

1 Count how many 1 (standby) indicator flashes between each two second break.

For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc.

2 Press 1 on the top edge of the TV to turn it off, disconnect the AC power cord, and inform your dealer

or Sony service centre of how the indicator flashes (number of flashes).

When it is not flashing

1 Check the items listed below.

2 If the problem still persists, have your TV serviced by qualified service personnel.

Problem Cause/Remedy

No Picture

No picture (screen is dark) and

no sound

• Check the antenna/cable connection.

• Connect the TV to the AC power outlet, and press 1 on the top edge of the TV.

• If the 1 (standby) indicator lights up in red, press "/1.

No picture or no menu

information from equipment

connected to the video input

jack

• Press / to display the connected equipment list, then select the desired

input.

• Check the connection between the optional equipment and the TV.

Poor Picture

Only snow and noise appear

on the screen

• Check if the antenna is broken or bent.

• Check if the antenna has reached the end of its serviceable life (three to five years in

normal use, one to two years at the seaside).

Distorted picture (dotted lines

or stripes)

• Keep the TV away from electrical noise sources such as cars, motorcycles, hair-

dryers or optional equipment.

• When installing optional equipment, leave some space between the optional

equipment and the TV.

• Check the antenna/cable connection.

• Keep the antenna cable away from other connecting cables.

• Broadcast signals are too strong. Set the “Signal Booster” to “Off” (page 31) or turn

off or disconnect the booster if it is in use.

Picture or sound noise when

viewing a TV channel

• Select “Manual Programme Preset” in the “Channel Set-up” menu and adjust

“AFT” (Automatic Fine Tuning) to obtain better picture reception (page 31).

• Select “Noise Reduction” in the “Picture” menu to reduce the noise in the picture

(page 23).

Continued

010COV.book Page 33 Thursday, June 19, 2008 10:03 AM

1 2 ... 28 29 30 31 32 33 34 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Sony KLV-26S400A Instrukcja Użytkownika Strona 33

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Telewizory CRT Sony KLV-26S400A