Quick Setup Guide
4-279-074-11(1)
BDV-L800
©2011 Sony Corporation Printed in Malaysia
1
Setting up the speakers
1. Connect the speaker cords to the subwoofer.
Rear panel of the subwoofer Rear of the front speaker
Red (Front right
speaker (R))
White
(Front left speaker (L))
Rear of the front speaker
2. Remove the panel cover from the main unit.
Press the panel cover at () gently, then slide it out to the side.
3. Insert the wireless transceivers into the main unit and
subwoofer.
Wireless transceiver
Wireless transceiver
4. Position the speakers.
2
Connect your TV and other components
4. Bring together the cables (except the FM wire antenna (aerial)),
guide them through the slot at the right of the main unit,
behind the clamp (), and through the slot at the bottom of
the main unit.
Thread the FM wire antenna (aerial) through the small
indentation at the rear of the main unit.
FM wire antenna (aerial)
5. Attach the panel cover to the rear of the main unit.
Put the left edge of the lower part of the panel cover on (), align the
bottom projection of the panel cover with (), and then slide it inward
until it clicks into place.
FM wire antenna (aerial)
6. Attach the stand cover to the rear of the main unit.
Align both edges of lower part of the stand cover with the guides on the
stand (), and then slide the stand cover down gently.
3
Perform “Easy Setup”
Do not insert a disc before performing the “Easy Setup”.
1. Insert batteries into the remote.
2. Connect the AC power cords (mains leads) of the main unit and
subwoofer.
3. Press
on the main unit to turn the system on.
After the subwoofer turns on, the LINK/STANDBY indicator () turns
green and the wireless transmission is activated.
4. Turn on the TV, and switch the input selector on your TV so
that system screens like the ones below appear on the TV
screen.
Starting up “Easy Setup” screen
5. Perform basic settings by following the on-screen instructions
in “Easy Setup” using
/
/
/
and
.
/
/
/
,
[Easy Setup is now complete.] appears when “Easy Setup” is complete.
English
1. Connect a High Speed HDMI cable to your TV.
Depending on the jacks on your TV, select the video and audio
connection method.
High Speed HDMI cable*
* Not supplied
2. Connect a High Speed HDMI cable to your set-top box, game
console or digital satellite receiver.
High Speed HDMI cable*
* Not supplied
3. Plug the connector of the AC adapter into the DC IN 14V
connector on the rear of the main unit.
Thread the AC power cord (mains lead) through the gap on the
main unit by securing it behind the tabs, guide it through the
slot at the left of the main unit, behind the clamp (), and
through the slot at the bottom of the main unit.
Tabs
(1)
(2 strony)
(2 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji